782 lines
35 KiB
C
782 lines
35 KiB
C
#ifndef _API_BTSTACK_H
|
||
#define _API_BTSTACK_H
|
||
|
||
//工作模式
|
||
#define MODE_NORMAL 0
|
||
#define MODE_CBT_TEST 1
|
||
#define MODE_FCC_TEST 2
|
||
#define MODE_BQB_RF 3
|
||
#define MODE_BQB_PROFILE 4
|
||
|
||
//蓝牙功能
|
||
#define PROF_A2DP 0x0007 //蓝牙音乐功能
|
||
#define PROF_HID 0x0018 //蓝牙键盘功能
|
||
#define PROF_HFP 0x0060 //蓝牙通话功能
|
||
#define PROF_SPP 0x0080 //蓝牙串口功能
|
||
#define PROF_PBAP 0x0100 //蓝牙电话本功能
|
||
#define PROF_HSP 0x0200
|
||
#define PROF_MAP 0x0400 //蓝牙短息功能
|
||
|
||
//蓝牙特性
|
||
#define HFP_BAT_REPORT 0x01 //是否支持手机电量显示
|
||
#define HFP_3WAY_CALL 0x02 //是否支持三通电话
|
||
#define HFP_INBAND_RING_RONE 0x04 //是否支持手机来电铃声
|
||
#define HFP_CALL_PRIVATE 0x08 //是否打开强制私密接听
|
||
#define HFP_SIRI_CMD 0x10 //是否打开siri控制命令
|
||
#define HFP_EC_AND_NR 0x20 //是否打开手机端回音和降噪
|
||
#define HFP_RING_NUMBER_EN 0x40 //是否支持来电报号
|
||
#define A2DP_VOL_CTRL 0x01 //是否支持手机音量控制同步
|
||
#define A2DP_IOS_PLAY_STATUS 0x02 //是否支持IOS手机播放状态同步，注意打开后微信小视频会无声，蓝牙后台建议打开
|
||
#define A2DP_ANDROID_PLAY_STATUS 0x04 //是否支持ANDROID手机播放状态同步
|
||
#define A2DP_RESTORE_PLAYING 0x08 //是否支持掉线回连后恢复播放
|
||
#define A2DP_AVDTP_DELAY_REPORT 0x10 //是否支持AVDTP delay report功能
|
||
|
||
//蓝牙编解码
|
||
#define CODEC_SBC 0x01
|
||
#define CODEC_AAC 0x02
|
||
#define CODEC_MSBC 0x04
|
||
#define CODEC_PLC 0x08
|
||
|
||
|
||
//蓝牙状态
|
||
enum {
|
||
BT_STA_OFF, //蓝牙模块已关闭
|
||
BT_STA_INITING, //初始化中
|
||
BT_STA_IDLE, //蓝牙模块打开，未连接
|
||
|
||
BT_STA_SCANNING, //扫描中
|
||
BT_STA_DISCONNECTING, //断开中
|
||
BT_STA_CONNECTING, //连接中
|
||
|
||
BT_STA_CONNECTED, //已连接
|
||
BT_STA_PLAYING, //播放
|
||
BT_STA_INCOMING, //来电响铃
|
||
BT_STA_OUTGOING, //正在呼出
|
||
BT_STA_INCALL, //通话中
|
||
BT_STA_OTA, //OTA升级中
|
||
};
|
||
|
||
//通话状态
|
||
enum {
|
||
BT_CALL_IDLE, //空闲
|
||
BT_CALL_INCOMING, //来电响铃
|
||
BT_CALL_OUTGOING, //正在呼出
|
||
BT_CALL_ACTIVE, //通话中
|
||
BT_CALL_3WAY_CALL, //三通电话或两部手机通话
|
||
};
|
||
|
||
//蓝牙通知
|
||
enum {
|
||
BT_NOTICE_INIT_FINISH, //蓝牙初始化完成
|
||
BT_NOTICE_CONNECT_START, //开始回连手机, param[0]=nouse, param[6:1]=bd_addr
|
||
BT_NOTICE_CONNECT_FAIL, //回连手机失败, param[0]=reason, param[6:1]=bd_addr
|
||
BT_NOTICE_DISCONNECT, //蓝牙断开, param[0]=feat, param[6:1]=bd_addr
|
||
BT_NOTICE_LOSTCONNECT, //蓝牙连接丢失, param[0]=nouse, param[6:1]=bd_addr
|
||
BT_NOTICE_CONNECTED, //蓝牙连接成功, param[0]=feat, param[6:1]=bd_addr
|
||
BT_NOTICE_SCO_SETUP,
|
||
BT_NOTICE_SCO_FAIL,
|
||
BT_NOTICE_SCO_KILL,
|
||
|
||
BT_NOTICE_RSSI_REPORT, //上报连接RSSI
|
||
|
||
BT_NOTICE_INCOMING, //来电
|
||
BT_NOTICE_RING, //来电响铃
|
||
BT_NOTICE_OUTGOING, //去电
|
||
BT_NOTICE_CALL_NUMBER, //来电/去电号码
|
||
BT_NOTICE_INCALL, //建立通话
|
||
BT_NOTICE_ENDCALL, //结束通话
|
||
BT_NOTICE_NETWORK_CALL, //网络通话
|
||
BT_NOTICE_PHONE_CALL, //手机通话
|
||
|
||
BT_NOTICE_SET_SPK_GAIN, //设置通话音量
|
||
BT_NOTICE_MUSIC_PLAY, //蓝牙音乐开始播放
|
||
BT_NOTICE_MUSIC_STOP, //蓝牙音乐停止播放
|
||
BT_NOTICE_MUSIC_CHANGE_VOL, //改变蓝牙音乐音量
|
||
BT_NOTICE_MUSIC_SET_VOL, //设置蓝牙音乐音量
|
||
BT_NOTICE_HID_CONN_EVT, //HID服务连接事件
|
||
|
||
BT_NOTICE_SET_XOSC_CAP, //推出测试盒校准成功消息
|
||
|
||
///PBAP相关消息
|
||
BT_NOTICE_PBAP_CONNECTED,
|
||
BT_NOTICE_PBAP_GET_PHONEBOOK_SIZE_COMPLETE, //获取电话薄数量完成
|
||
BT_NOTICE_PBAP_PULL_PHONEBOOK_COMPLETE, //获取电话薄完成
|
||
BT_NOTICE_PBAP_DISCONNECT,
|
||
|
||
BT_NOTICE_FAST_MUSIC_STATUS, //快速上报音乐播放暂停状态
|
||
};
|
||
|
||
//控制消息
|
||
enum {
|
||
BT_CTL_VOL_CHANGE = 0, //音量调整
|
||
BT_CTL_PLAY_PAUSE, //切换播放、暂停
|
||
BT_CTL_LOW_LATENCY_ENABLE, //打开低延迟
|
||
BT_CTL_LOW_LATENCY_DISABLE, //关闭低延迟
|
||
BT_CTL_MSC_RES0,
|
||
BT_CTL_MSC_RES1,
|
||
BT_CTL_MSC_RES2,
|
||
BT_CTL_MSC_RES3,
|
||
|
||
BT_CTL_CALL_REDIAL, //回拨电话（最后一次通话）
|
||
BT_CTL_CALL_REDIAL_NUMBER, //回拨电话（从hfp_get_outgoing_number获取号码）
|
||
BT_CTL_CALL_ANSWER_INCOM, //接听来电（三通时挂起当前通话）
|
||
BT_CTL_CALL_ANSWER_INCOM_REJ_OTHER, //接听来电（三通时挂断当前通话）
|
||
BT_CTL_CALL_TERMINATE, //挂断通话或来电
|
||
BT_CTL_CALL_SWAP, //切换三通电话
|
||
BT_CTL_CALL_PRIVATE_SWITCH, //切换私密通话
|
||
BT_CTL_HFP_REPORT_BAT, //报告电池电量
|
||
BT_CTL_HFP_SPK_GAIN, //设置通话扬声器音量
|
||
BT_CTL_HFP_MIC_GAIN, //设置通话麦克风音量
|
||
BT_CTL_HFP_AT_CMD, //发送AT命令（从hfp_get_at_cmd获取命令）
|
||
BT_CTL_HFP_SIRI_SW, //唤出/关闭siri
|
||
BT_CTL_HFP_REMOTE_PHONE_NUM,
|
||
BT_CTL_HFP_SWITCH_TO_PHONE,
|
||
BT_CTL_HFP_SWITCH_TO_WATCH,
|
||
BT_CTL_HFP_RES1,
|
||
BT_CTL_HFP_RES2,
|
||
BT_CTL_HFP_RES3,
|
||
|
||
BT_CTL_HID_CONNECT,
|
||
BT_CTL_HID_DISCONNECT,
|
||
BT_CTL_BLE_ADV_DISABLE, //关闭BLE 广播
|
||
BT_CTL_BLE_ADV_ENABLE, //打开BLE 广播
|
||
BT_CTL_RES0,
|
||
BT_CTL_RES1,
|
||
BT_CTL_SWITCH_PALY,
|
||
BT_CTL_GET_ID3_TAG,
|
||
BT_CTL_GET_PLAY_STATUS_INFO,
|
||
BT_CTL_A2DP_PROFILE_EN,
|
||
BT_CTL_A2DP_PROFILE_DIS,
|
||
BT_CTL_HFP_CONNECT,
|
||
BT_CTL_HFP_DISCONNECT,
|
||
BT_CTL_SEARCH_OS_CAPACITY,
|
||
BT_CTL_MAX,
|
||
|
||
BT_CTL_VOLUME_UP = 0xff0041, //音量加
|
||
BT_CTL_VOLUME_DOWN = 0xff0042, //音量减
|
||
BT_CTL_MUTE = 0xff0043, //MUTE
|
||
BT_CTL_PLAY = 0xff0044, //播放
|
||
BT_CTL_STOP = 0xff0045, //停止
|
||
BT_CTL_PAUSE = 0xff0046, //暂停
|
||
BT_CTL_RECORD = 0xff0047,
|
||
BT_CTL_REWIND = 0xff0048, //快退
|
||
BT_CTL_FAST_FORWARD = 0xff0049, //快进
|
||
BT_CTL_EJECT = 0xff004a,
|
||
BT_CTL_FORWARD = 0xff004b, //下一曲
|
||
BT_CTL_BACKWARD = 0xff004c, //上一曲
|
||
BT_CTL_REWIND_END = 0xff00c8, //结束快退
|
||
BT_CTL_FAST_FORWARD_END = 0xff00c9, //结束快进
|
||
|
||
BT_CTL_NO = 0xffffff,
|
||
};
|
||
|
||
enum bt_msg_comm_t {
|
||
COMM_BT_CTL0, //无传参的消息
|
||
COMM_BT_SET_SCAN, //设置可被发现/可被连接
|
||
COMM_BT_CONNECT, //连接蓝牙
|
||
COMM_BT_DISCONNECT, //断开蓝牙
|
||
COMM_BT_DISC_SCO_LINK, //断开SCO链路
|
||
COMM_BT_SET_SCAN_INTV, //设置PAGE SCAN PARAM
|
||
COMM_LE_AMS_REMOTE_CTRL, //LE AMS remote ctl
|
||
COMM_BT_ABORT_RECONNECT, //终止回连
|
||
|
||
};
|
||
|
||
enum bt_msg_hid_t {
|
||
HID_KEYBOARD,
|
||
HID_CONSUMER,
|
||
HID_TOUCH_SCREEN,
|
||
HID_SIMPLE_KEYBOARD,
|
||
};
|
||
|
||
enum bt_msg_pbap_t {
|
||
BT_PBAP_CTRL,
|
||
BT_PBAP_SELECT_PHONEBOOK,
|
||
BT_PBAP_GET_PHONEBOOK_SIZE,
|
||
BT_PBAP_PULL_PHONEBOOK,
|
||
};
|
||
|
||
//蓝牙消息
|
||
enum bt_msg_t {
|
||
BT_MSG_CTRL = 0, //蓝牙控制消息
|
||
BT_MSG_COMM,
|
||
BT_MSG_RES1,
|
||
BT_MSG_RES2,
|
||
BT_MSG_ADV0,
|
||
BT_MSG_A2DP, //A2DP消息
|
||
BT_MSG_HFP, //HFP消息
|
||
BT_MSG_HSP, //HSP消息
|
||
BT_MSG_HID, //HID消息，KEYPAD按键/CONSUMER按键/触摸屏
|
||
BT_MSG_PBAP, //PBAP消息
|
||
BT_MSG_LECLT, //BLE CLIENT消息
|
||
BT_MSG_MAP, //MAP消息 获取时间
|
||
BT_MSG_MAX,
|
||
BT_MSG_RES = 0xf0, //0xf0~0xff保留给传参较多的api
|
||
};
|
||
|
||
enum sync_info_enum {
|
||
SYNC_INFO_SETTING, //VOL/LANG/EQ/BAT/...
|
||
SYNC_INFO_LEDCNT, //同步 led cnt
|
||
SYNC_INFO_EQPARAM,
|
||
};
|
||
|
||
//LE Addr Type, public or random(static or non resolvable or resolvable)
|
||
enum {
|
||
GAP_RANDOM_ADDRESS_TYPE_OFF = 0, //Public
|
||
GAP_RANDOM_ADDRESS_TYPE_STATIC,
|
||
GAP_RANDOM_ADDRESS_NON_RESOLVABLE,
|
||
GAP_RANDOM_ADDRESS_RESOLVABLE,
|
||
};
|
||
|
||
//LE状态
|
||
enum {
|
||
LE_STA_STANDBY,
|
||
LE_STA_ADVERTISING, //正在广播
|
||
LE_STA_CONNECTION, //已连接
|
||
};
|
||
|
||
//LE 通知
|
||
typedef enum{
|
||
LE_NOTICE_CONNECTED, //连接成功
|
||
LE_NOTICE_DISCONNECT, //断开成功
|
||
LE_NOTICE_CONN_PARAM_UPDATE, //连接参数更新
|
||
LE_NOTICE_DATA_LEN_CHANGE, //收发长度改变
|
||
LE_NOTICE_CLINET_CFG, //客户端配置特性
|
||
|
||
LE_NOTICE_ANCS_CONN_EVT, //ancs client连接事件
|
||
LE_NOTICE_AMS_CONN_EVT, //ams client连接事件
|
||
}ble_cb_enum;
|
||
|
||
//LE GATT 服务相关
|
||
/**
|
||
BLE GATTS ERR return
|
||
*/
|
||
#define BLE_GATTS_SUCCESS 0x00
|
||
#define BLE_GATTS_SRVC_TYPE_ERR 0x01
|
||
#define BLE_GATTS_SRVC_RULES_ERR 0x02
|
||
#define BLE_GATTS_SRVC_PROPS_ERR 0x03
|
||
#define BLE_GATTS_SRVC_ATT_FULL_ERR 0x04
|
||
#define BLE_GATTS_SRVC_PROFILE_FULL_ERR 0x05
|
||
|
||
|
||
/**
|
||
att property flag
|
||
*/
|
||
#define ATT_BROADCAST 0x01
|
||
#define ATT_READ 0x02
|
||
#define ATT_WRITE_WITHOUT_RESPONSE 0x04
|
||
#define ATT_WRITE 0x08
|
||
#define ATT_NOTIFY 0x10
|
||
#define ATT_INDICATE 0x20
|
||
#define ATT_AUTHENTICATED_SIGNED_WRITE 0x40
|
||
#define ATT_EXTENDED_PROPERTIES 0x80
|
||
#define ATT_DYNAMIC 0x100
|
||
#define ATT_UUID128 0x200
|
||
#define ATT_AUTHENTICATION_REQUIRED 0x400
|
||
#define ATT_AUTHORIZATION_REQUIRED 0x800
|
||
|
||
|
||
/**
|
||
define group GATT Server Service Types
|
||
*/
|
||
typedef enum {
|
||
BLE_GATTS_SRVC_TYPE_PRIMARY = 0x00, //Primary Service
|
||
BLE_GATTS_SRVC_TYPE_SEVONDARY= 0x01, //Secondary Service
|
||
BLE_GATTS_SRVC_TYPE_INCLUDE = 0x02, //include Type
|
||
} ble_gatts_service_type;
|
||
|
||
/**
|
||
define group GATT Server UUID Types
|
||
*/
|
||
typedef enum {
|
||
BLE_GATTS_UUID_TYPE_16BIT = 0x00, //UUID 16BIT
|
||
BLE_GATTS_UUID_TYPE_128BIT = 0x01, //UUID 128BIT
|
||
} ble_gatts_uuid_type;
|
||
|
||
/**
|
||
define GATT handler callback
|
||
con_handle: connect handle
|
||
handle : attribute handle
|
||
flag : call back flag
|
||
*/
|
||
#define ATT_CB_FALG_OFFSET (0xffff)
|
||
#define ATT_CB_FALG_DIR_WRITE (0x10000)
|
||
typedef int (*ble_gatt_callback_func)(uint16_t con_handle, uint16_t handle, uint32_t flag, uint8_t *ptr, uint16_t len);
|
||
|
||
/**
|
||
define GATT service base
|
||
*/
|
||
typedef struct gatts_service_base{
|
||
uint16_t handle;
|
||
} gatts_service_base_st;
|
||
|
||
|
||
/**
|
||
define GATT service uuid
|
||
*/
|
||
typedef struct gatts_uuid_base{
|
||
uint16_t props;
|
||
uint8_t type;
|
||
const uint8_t *uuid;
|
||
} gatts_uuid_base_st;
|
||
/**
|
||
define GATT service call back info
|
||
*/
|
||
typedef struct {
|
||
uint16_t client_config; // att config, 1:notify enable; 2:indicate enable;
|
||
uint16_t value_len;
|
||
ble_gatt_callback_func att_write_callback_func; // 特征值的写操作回调
|
||
ble_gatt_callback_func att_read_callback_func; // 特征值的读操作回调, 注意要设置value_len
|
||
uint8_t *value; // read return data, when att_read_callback_func is NULL
|
||
} ble_gatt_characteristic_cb_info_t;
|
||
|
||
#define GATT_CLIENT_CONFIG_NOTIFY 1
|
||
#define GATT_CLIENT_CONFIG_INDICATE 2
|
||
|
||
/**
|
||
define group GATT Server profile struct
|
||
*/
|
||
typedef struct gatts_profile_list{
|
||
void *item;
|
||
uint16_t profile_start_handle;
|
||
uint16_t profile_end_handle;
|
||
const uint8_t *profile_date;
|
||
uint16_t profile_date_size;
|
||
} ble_gatts_profile_list_st;
|
||
|
||
#define BD_ADDR_LENGTH 6
|
||
typedef uint8_t bd_addr_t[BD_ADDR_LENGTH];
|
||
|
||
extern uint8_t cfg_bt_work_mode;
|
||
extern uint8_t cfg_bt_max_acl_link;
|
||
extern bool cfg_bt_dual_mode;
|
||
extern bool cfg_bt_scan_ctrl_mode;
|
||
extern bool cfg_bt_simple_pair_mode;
|
||
extern bool cfg_bt_voip_reject_en;
|
||
extern uint16_t cfg_bt_support_profile;
|
||
extern uint16_t cfg_bt_support_codec;
|
||
extern uint8_t cfg_bt_hid_type;
|
||
extern uint16_t cfg_bt_def_connect_times;
|
||
extern uint16_t cfg_bt_sup_to_connect_times;
|
||
|
||
extern uint8_t cfg_bt_rf_def_txpwr;
|
||
extern uint8_t cfg_bt_page_inq_txpwr;
|
||
|
||
extern uint8_t cfg_bt_a2dp_feature;
|
||
extern uint8_t cfg_bt_hfp_feature;
|
||
extern uint8_t cfg_bt_sniff_clk_sel;
|
||
|
||
#define bt_a2dp_is_vol_ctrl() (cfg_bt_a2dp_feature & A2DP_VOL_CTRL)
|
||
#define bt_a2dp_is_ios_play_status() (cfg_bt_a2dp_feature & A2DP_IOS_PLAY_STATUS)
|
||
|
||
//control
|
||
void bt_fcc_init(void);
|
||
void bt_init(void); //初始化蓝牙变量
|
||
int bt_setup(void); //打开蓝牙模块
|
||
void bt_off(void); //关闭蓝牙模块
|
||
void bt_wakeup(void); //唤醒蓝牙模块
|
||
void bt_send_msg_do(uint msg); //蓝牙控制消息，参数详见bt_msg_t
|
||
void bt_audio_bypass(void); //蓝牙SBC/SCO通路关闭
|
||
void bt_audio_enable(void); //蓝牙SBC/SCO通路使能
|
||
void bt_set_sco_far_delay(void *buf, uint size, uint delay);
|
||
|
||
void bt_set_scan(u8 iscan, u8 pscan); //打开/关闭可被发现和可被连接
|
||
void bt_set_scan_param(uint param); //pscan int = 0x100*((param >> 8)&0xff) + 1), iscan int = 0x100*((param&0xff) + 1)
|
||
uint8_t bt_get_scan(void); //获取设置的可被发现可被连接状态
|
||
void bt_connect(uint times); //蓝牙设备回连, times: 重试次数（每次6s）
|
||
void bt_disconnect(uint reason); //蓝牙设备断开, reason: 0=单独断开（入仓），1=断开并同步关机（按键/自动关机）
|
||
void bt_hid_connect(void); //蓝牙HID服务回连
|
||
void bt_hid_disconnect(void); //蓝牙HID服务断开
|
||
uint32_t bt_sleep_proc(void);
|
||
void bt_enter_sleep(void);
|
||
void bt_exit_sleep(void);
|
||
void updata_bt_name(char *bt_name);
|
||
|
||
//status
|
||
uint bt_get_disp_status(void); //获取蓝牙的当前显示状态
|
||
uint bt_get_status(void); //获取蓝牙的当前状态
|
||
uint bt_get_call_indicate(void); //获取通话的当前状态
|
||
uint bt_get_siri_status(void); //获取SIRI当前状态, 0=SIRI已退出, 1=SIRI已唤出
|
||
bool bt_is_calling(void); //判断是否正在通话
|
||
bool bt_is_playing(void); //判断是否正在播放
|
||
bool bt_is_ring(void); //判断是否正在响铃
|
||
bool bt_is_testmode(void); //判断当前蓝牙是否处于测试模式
|
||
bool bt_is_sleep(void); //判断蓝牙是否进入休眠状态
|
||
bool bt_is_connected(void); //判断蓝牙是否已连接
|
||
bool bt_is_ios_device(void); //判断当前播放的是否ios设备
|
||
bool sco_is_connected(void); //判断当前SCO链路是否连接
|
||
bool bt_sco_is_msbc(void); //判断当前通话是否是宽带通话
|
||
bool bt_a2dp_is_connected(void); //判断蓝牙A2DP是否已连接
|
||
bool bt_hfp_is_connected(void); //判断蓝牙HFP是否已连接
|
||
int bt_hid_is_connected(void); //判断蓝牙hid是否已连接
|
||
bool bt_hid_is_ready_to_discon(void);
|
||
bool sbc_is_bypass(void);
|
||
bool bt_sync_tick(void); //根据蓝牙时钟同步到50ms，误差为5ms
|
||
void bt_reset_addr(void); //重置bt地址, 值通过bt_get_local_bd_addr设置;
|
||
void bt_read_conn_rssi(void); //获取当前连接RSSI
|
||
|
||
//info
|
||
bool bt_get_link_btname(uint8_t index, char *name, uint8_t max_size); //index: 0=link0, 1=link1, 0xff=auto(default link0)
|
||
bool bt_nor_get_link_info(uint8_t *bd_addr); //获取手机配对信息，bd_addr=NULL时仅查询是否存在回连信息
|
||
bool bt_nor_get_link_info_addr(uint8_t *bd_addr, uint8_t order); //获取第n个手机配对信息，bd_addr=NULL时仅查询是否存在回连信息
|
||
void bt_nor_delete_link_info(void); //删除手机配对信息
|
||
bool bt_nor_get_link_info_addr_ex(void);
|
||
|
||
#define bt_send_msg(ogf, ocf) bt_send_msg_do((ogf<<24) | (ocf))
|
||
#define bt_ctrl_msg(msg) bt_send_msg(BT_MSG_CTRL, msg)
|
||
#define bt_comm_msg(msg, param) bt_send_msg(BT_MSG_COMM, (msg<<16) | (u16)param)
|
||
#define bt_hid_msg(msg, param) bt_send_msg(BT_MSG_HID, (msg<<16) | (u16)param)
|
||
#define bt_pbap_msg(msg, param) bt_send_msg(BT_MSG_PBAP, (msg<<16) | (u16)param)
|
||
|
||
//蓝牙连接
|
||
#define bt_scan_enable() bt_set_scan(1, 1) //打开扫描
|
||
#define bt_scan_disable() bt_set_scan(0, 0) //关闭扫描
|
||
#define bt_search_os_capacity() bt_ctrl_msg(BT_CTL_SEARCH_OS_CAPACITY) //主动发起查询当前连接的设备是否IOS，发起查询后，调用判断bt_is_ios_device(),连接2个手机此函数无效
|
||
#define bt_abort_reconnect() bt_comm_msg(COMM_BT_ABORT_RECONNECT, 0xffff) //终止回接
|
||
|
||
//蓝牙音乐
|
||
#define bt_music_play() bt_ctrl_msg(BT_CTL_PLAY) //播放
|
||
#define bt_music_pause() bt_ctrl_msg(BT_CTL_PAUSE) //暂停
|
||
#define bt_music_play_pause() bt_ctrl_msg(BT_CTL_PLAY_PAUSE) //切换播放/暂停
|
||
#define bt_music_stop() bt_ctrl_msg(BT_CTL_STOP) //停止
|
||
#define bt_music_prev() bt_ctrl_msg(BT_CTL_BACKWARD) //上一曲
|
||
#define bt_music_next() bt_ctrl_msg(BT_CTL_FORWARD) //下一曲
|
||
#define bt_music_rewind() bt_ctrl_msg(BT_CTL_REWIND) //开始快退
|
||
#define bt_music_rewind_end() bt_ctrl_msg(BT_CTL_REWIND_END) //结束快退
|
||
#define bt_music_fast_forward() bt_ctrl_msg(BT_CTL_FAST_FORWARD) //开始快进
|
||
#define bt_music_fast_forward_end() bt_ctrl_msg(BT_CTL_FAST_FORWARD_END) //结束快进
|
||
#define bt_music_vol_change() bt_ctrl_msg(BT_CTL_VOL_CHANGE) //通知手机音量已调整
|
||
#define bt_2acl_switch_music_play() bt_ctrl_msg(BT_CTL_SWITCH_PALY);
|
||
#define bt_music_get_id3_tag() bt_ctrl_msg(BT_CTL_GET_ID3_TAG); //主动查询id3 tag信息
|
||
#define bt_music_paly_status_info() bt_ctrl_msg(BT_CTL_GET_PLAY_STATUS_INFO);//获取歌曲时长单位ms,当前播放位置,播放状态信息
|
||
|
||
//蓝牙通话
|
||
#define bt_call_redial_last_number() bt_ctrl_msg(BT_CTL_CALL_REDIAL) //电话回拨（最后一次通话）
|
||
#define bt_call_answer_incoming() bt_ctrl_msg(BT_CTL_CALL_ANSWER_INCOM) //接听电话，三通时挂起当前通话
|
||
#define bt_call_answer_incom_rej_other() bt_ctrl_msg(BT_CTL_CALL_ANSWER_INCOM_REJ_OTHER) //接听电话，三通时挂断当前通话
|
||
#define bt_call_terminate() bt_ctrl_msg(BT_CTL_CALL_TERMINATE) //挂断电话
|
||
#define bt_call_swap() bt_ctrl_msg(BT_CTL_CALL_SWAP) //切换三通电话
|
||
#define bt_call_private_switch() bt_ctrl_msg(BT_CTL_CALL_PRIVATE_SWITCH) //切换私密通话
|
||
#define bt_call_redial_number() bt_ctrl_msg(BT_CTL_CALL_REDIAL_NUMBER)
|
||
#define bt_call_get_remote_phone_number() bt_ctrl_msg(BT_CTL_HFP_REMOTE_PHONE_NUM) //获取远端号码
|
||
#define bt_hfp_siri_switch() bt_ctrl_msg(BT_CTL_HFP_SIRI_SW) //开关SIRI, android需要在语音助手中打开“蓝牙耳机按键启动”, ios需要打开siri功能
|
||
#define bt_hfp_report_bat() bt_ctrl_msg(BT_CTL_HFP_REPORT_BAT)
|
||
#define bt_hfp_set_spk_gain() bt_ctrl_msg(BT_CTL_HFP_SPK_GAIN)
|
||
#define bt_hfp_send_at_cmd() bt_ctrl_msg(BT_CTL_HFP_AT_CMD)
|
||
#define bt_hfp_switch_to_phone() bt_ctrl_msg(BT_CTL_HFP_SWITCH_TO_PHONE) //通话切到手机
|
||
#define bt_hfp_switch_to_watch() bt_ctrl_msg(BT_CTL_HFP_SWITCH_TO_WATCH) //通话切在手表
|
||
|
||
//服务控制
|
||
#define bt_a2dp_profile_en() bt_ctrl_msg(BT_CTL_A2DP_PROFILE_EN) //打开A2DP服务
|
||
#define bt_a2dp_profile_dis() bt_ctrl_msg(BT_CTL_A2DP_PROFILE_DIS) //关闭A2DP服务
|
||
#define bt_hfp_profile_en() bt_ctrl_msg(BT_CTL_HFP_CONNECT) //打开HFP服务
|
||
#define bt_hfp_profile_dis() bt_ctrl_msg(BT_CTL_HFP_DISCONNECT) //关闭HFP服务
|
||
|
||
//PBAP
|
||
#define bt_pbap_connect() bt_pbap_msg(BT_PBAP_CTRL, 1)
|
||
#define bt_pbap_disconnect() bt_pbap_msg(BT_PBAP_CTRL, 0)
|
||
#define bt_pbap_select_phonebook(book, sim) bt_pbap_msg(BT_PBAP_SELECT_PHONEBOOK, (sim<<8) | (u8)book)
|
||
// sim - 1:选择SIM卡，0:本机
|
||
// book- 0:pb, 1:fav, 2-ich, 3:och, 4-mch, 5-cch, 6-spd
|
||
// 若不配置，则选择默认值为本机pb
|
||
#define bt_pbap_get_phonebook_size() bt_pbap_msg(BT_PBAP_GET_PHONEBOOK_SIZE, 0)
|
||
#define bt_pbap_pull_phonebook_whole() bt_pbap_msg(BT_PBAP_PULL_PHONEBOOK, 0)
|
||
#define bt_pbap_pull_phonebook_single(idx) bt_pbap_msg(BT_PBAP_PULL_PHONEBOOK, idx)
|
||
// 按编号获取联系人信息
|
||
// idx不为零，如果为零则直接获取整个电话本信息
|
||
void bt_pbap_lookup_number(char *phone_number);
|
||
|
||
//pkt
|
||
typedef void (*kick_func_t)(void);
|
||
|
||
struct txbuf_tag {
|
||
uint8_t *ptr;
|
||
uint16_t len;
|
||
uint16_t handle;
|
||
} __attribute__ ((packed)) ;
|
||
|
||
struct txpkt_tag
|
||
{
|
||
struct txbuf_tag *buf;
|
||
uint16_t buf_size;
|
||
uint8_t total;
|
||
volatile uint8_t cnt;
|
||
uint8_t rptr;
|
||
volatile uint8_t wptr;
|
||
kick_func_t send_kick;
|
||
};
|
||
extern struct txpkt_tag notify_tx;
|
||
|
||
uint32_t txpkt_init(struct txpkt_tag *txpkt, void *mem_pool, uint8_t total, uint16_t buf_size);
|
||
|
||
|
||
void spp_init(void);
|
||
void hfp_hf_init(void);
|
||
void a2dp_init(void);
|
||
void aap_init(void);
|
||
uint8_t sdp_add_service(void *item);
|
||
void sdp_rmv_service(uint32_t service_record_handle);
|
||
uint bt_get_hfp_feature(void);
|
||
int bt_spp_tx(uint8_t *packet, uint16_t len);
|
||
|
||
//hid
|
||
void hid_device_init(void);
|
||
bool bt_hid_send(void *buf, uint len, bool auto_release); //自定义HID数组
|
||
bool bt_hid_send_key(uint type, uint keycode); //标准HID按键
|
||
#define bt_hid_key(keycode) bt_hid_send_key(HID_KEYBOARD, keycode) //标准HID键, 如Enter
|
||
#define bt_hid_consumer(keycode) bt_hid_send_key(HID_CONSUMER, keycode) //自定义HID键, 如VOL+ VOL-
|
||
#define bt_hid_touch_screen(keycode) bt_hid_send_key(HID_TOUCH_SCREEN, keycode) //触屏
|
||
bool bt_hid_touch_screen_set_key(void *ts);
|
||
|
||
#define bt_hid_finger_select_ios() bt_hid_msg(HID_TOUCH_SCREEN, 1) //抖音视频选择IOS系统, 需要在bt连接前调用区分
|
||
#define bt_hid_finger_select_andriod() bt_hid_msg(HID_TOUCH_SCREEN, 2) //抖音视频选择andriod系统, 需要在bt连接前调用区分
|
||
/**
|
||
* @brief 模拟触点函数
|
||
注意:IOS 范围是-2047-2048 ，安卓是0-4096;
|
||
IOS设备，x,y是相对位置，比如10,10是相对当前位置移动10,10;
|
||
安卓设备，x，y是绝对位置，10,10是在手机10,10的位置上;
|
||
* @param is_press 1按下，0抬起
|
||
* @param x 模拟触点横坐标
|
||
* @param y 模拟触点纵坐标
|
||
**/
|
||
void bt_hid_point_pos(bool is_press, s16 x, s16 y);
|
||
|
||
//goep
|
||
void goep_client_init(void);
|
||
//pbap
|
||
void pbap_client_init(void);
|
||
//map
|
||
void map_client_init(void);
|
||
void bt_map_start(void); //MAP的获取
|
||
void bt_map_abort(void); //终止MAP的获取
|
||
//hsp
|
||
void hsp_hs_init(void);
|
||
void hsp_hs_init_var(void);
|
||
void bt_hsp_call_switch(void); //挂断/接听
|
||
void bt_hsp_sco_conn(void); //建立HSP SCO连接
|
||
void bt_hsp_sco_disconn(void); //断开HSP SCO连接
|
||
|
||
/*****************************************************************************
|
||
* SIMPLE KEYBOARD API
|
||
*****************************************************************************/
|
||
#define bt_hid_simple_keyboard(keycode) bt_hid_send_key(HID_SIMPLE_KEYBOARD, keycode) //简易键盘
|
||
#define SIMPLE_KEYBOARD_VOL_UP 0x01
|
||
#define SIMPLE_KEYBOARD_VOL_DOWN 0x02
|
||
#define SIMPLE_KEYBOARD_NEXT 0x10
|
||
#define SIMPLE_KEYBOARD_PREV 0x20
|
||
#define SIMPLE_KEYBOARD_PLAY 0x88
|
||
#define SIMPLE_KEYBOARD_PLAY_UP 0x66
|
||
#define SIMPLE_KEYBOARD_RELEASE 0x00
|
||
void btstack_hid_simple_keyboard(uint);
|
||
|
||
/*****************************************************************************
|
||
* BLE API
|
||
*****************************************************************************/
|
||
#define ble_adv_dis() bt_ctrl_msg(BT_CTL_BLE_ADV_DISABLE)
|
||
#define ble_adv_en() bt_ctrl_msg(BT_CTL_BLE_ADV_ENABLE)
|
||
|
||
void ble_send_sm_req(void);
|
||
void ble_set_gap_name(char *gap_name, u8 len);
|
||
u16 ble_get_conn_interval(void); //N*1.25ms
|
||
u16 ble_get_conn_latency(void);
|
||
u16 ble_get_conn_timeout(void); //N*10ms
|
||
u16 ble_get_adv_interval(void); //N*625us
|
||
|
||
//init gatt
|
||
//profile_table: profile cache buf
|
||
//cb_info_table_p: call back info cache
|
||
|
||
|
||
/*****************************************************************************
|
||
* BLE连接相关（通道1，与BLE无连接广播相互独立）
|
||
*****************************************************************************/
|
||
void ble_send_kick(void);
|
||
|
||
/**
|
||
* @brief 主动请求mtu
|
||
* @return void
|
||
*
|
||
**/
|
||
void ble_exchange_mtu_request(void);
|
||
|
||
/**
|
||
* @brief 获取BLE的状态
|
||
* @return 3种状态的一种
|
||
LE_STA_STANDBY, //standby
|
||
LE_STA_ADVERTISING, //正在广播
|
||
LE_STA_CONNECTION, //已连接
|
||
*
|
||
**/
|
||
u8 ble_get_status(void);
|
||
|
||
/**
|
||
* @brief 判断BLE是否已经链接
|
||
* @return true表示已连接，false断开
|
||
*
|
||
**/
|
||
bool ble_is_connect(void);
|
||
|
||
/**
|
||
* @brief 获取当前MTU值
|
||
* @return 返回MTU
|
||
*
|
||
**/
|
||
u16 ble_get_gatt_mtu(void);
|
||
|
||
/**
|
||
* @brief 设置广播间隔时间
|
||
* 注意单位是625us
|
||
* @param[in] interval 参数数据，范围是32 到 16384
|
||
*
|
||
**/
|
||
void ble_set_adv_interval(u16 interval);
|
||
|
||
/**
|
||
* @brief 使能广播
|
||
*
|
||
*
|
||
**/
|
||
void ble_enable_adv(void);
|
||
|
||
/**
|
||
* @brief 关闭广播
|
||
*
|
||
*
|
||
**/
|
||
void ble_disable_adv(void);
|
||
|
||
/**
|
||
* @brief 断开BLE连接
|
||
*
|
||
*
|
||
**/
|
||
void ble_disconnect(void);
|
||
|
||
/**
|
||
* @brief 往手机(client)端发送数据
|
||
注: 发送的数据长度不能超过MTU设置，可以通过ble_get_gatt_mtu函数获取。
|
||
* @param[in] index GATT初始化的时候返回的一个ID，在ble_gatts_characteristic_add_do函数里有返回
|
||
* @param[in] buf 发送数据的buff
|
||
* @param[len] buf 发送数据的长度
|
||
* @return[int] 0: 成功
|
||
0x0C: APP没打开client_config，或发送的数据大于MTU，或BLE没连接
|
||
0x57: 内部缓存已满
|
||
0x56：发送数据为空指针；或发送数据大小超过init设置的(txpkt_init函数的buf_size参数)
|
||
*
|
||
**/
|
||
int ble_tx_notify(u8 index, u8* buf, u16 len);
|
||
|
||
/**
|
||
* @brief 更新连接间隔
|
||
注:
|
||
* @param[in] interval 连接间隔，1.25ms为单位；最大和最小连接间隔设置为一样了
|
||
* @param[in] latency 潜伏时间 可跳过多少事件
|
||
* @param[len] timeout 超时时间 10ms为单位
|
||
*
|
||
**/
|
||
void ble_update_conn_param(u16 interval, u16 latency, u16 timeout);
|
||
|
||
/**
|
||
* @brief 主动设置广播数据
|
||
注: 意思可以在广播过程中，更改广播数据
|
||
* @param[in] adv_buf 广播数据buff
|
||
* @param[in] size 数据大小最大31字节
|
||
* return : ture 成功
|
||
**/
|
||
bool ble_set_adv_data(const u8 *adv_buf, u32 size);
|
||
|
||
/**
|
||
* @brief 主动设置扫描响应数据
|
||
注: 意思可以在广播过程中，更改扫描相应
|
||
* @param[in] scan_rsp_buf 数据buff
|
||
* @param[in] size 数据大小最大31字节
|
||
* return : ture 成功
|
||
**/
|
||
bool ble_set_scan_rsp_data(const u8 *scan_rsp_buf, u32 size);
|
||
|
||
|
||
/**
|
||
* @brief 添加服务初始化函数
|
||
客户一般不需要直接调用，SDK默认引用好了
|
||
* @param[in] profile_table : 存储profile的buuff
|
||
* @param[in] profile_table_size : profile_table大小
|
||
* @param[in] cb_info_table_p：回调结构体
|
||
* @param[in] gatt_max_att：GATT数量的最多需求
|
||
**/
|
||
|
||
void ble_gatts_init(uint8_t *profile_table, uint16_t profile_table_size,
|
||
ble_gatt_characteristic_cb_info_t **cb_info_table_p,
|
||
uint16_t gatt_max_att);
|
||
|
||
/**
|
||
* @brief 添加服务函数
|
||
* @param[in] service_type BLE_GATTS_SRVC_TYPE_PRIMARY BLE_GATTS_SRVC_TYPE_SEVONDARY BLE_GATTS_SRVC_TYPE_INCLUDE一种
|
||
* @param[in] service_uuid UUID数据
|
||
* @param[in] uuid_type UUID类型，指16bit还是128bit类型
|
||
* @param[in] service_handle 用这个位置去获取当前分配的handle
|
||
**/
|
||
int ble_gatts_service_add(ble_gatts_service_type service_type, const uint8_t *service_uuid, ble_gatts_uuid_type uuid_type, uint8_t *service_handle);
|
||
|
||
/**
|
||
* @brief 添加特征值函数
|
||
* @param[in] att_uuid GATT的UUID
|
||
* @param[in] uuid_type UUID类型，指16bit还是128bit类型
|
||
* @param[in] props 读写权限
|
||
* @param[in] att_handle 用这个位置去获取当前分配的handle， 可以填NULL
|
||
* @param[in] cb_info： 回调信息，存放读写回调函数等
|
||
**/
|
||
int ble_gatts_characteristic_add( const uint8_t *att_uuid, ble_gatts_uuid_type uuid_type, uint16_t props,
|
||
uint16_t *att_handle, ble_gatt_characteristic_cb_info_t *cb_info);
|
||
|
||
/**
|
||
* @brief 检测BLE Notify的缓存是否满了
|
||
* @param[in] rsvd_num 这个参数的意思是这样的，比如您设置1，如果蓝牙底层可以用来缓存的数量小于或等于1，就返回1表示满了。
|
||
* 这个作用的目的是方便客户预留固定数量的force数量；举个栗子：有两个GATT，一个是Notify状态的，一个是Notfiy 音频数据的，由于音频数据大
|
||
* 会有机会把协议栈填满导致没有buff给Notify状态使用了，所以就引出这个函数用来给音频发送前使用，设置为1则可以保证每次至少有1个buff给Notify那边
|
||
* 而不至于阻塞；
|
||
* return : 1表示设置数量满了，0没满
|
||
**/
|
||
bool is_le_buff_full(uint rsvd_num);
|
||
|
||
|
||
|
||
/**
|
||
* @brief ams复位，设备端控制手机端播放暂停等
|
||
* opcode: 0播放，1暂停，2播放暂停，3下一曲，4上一去，5音量+，6音量-，详细参考AMS服务
|
||
*/
|
||
void ble_ams_remote_ctrl(uint8_t opcode);
|
||
|
||
/**
|
||
* @brief 发起ancs连接(不可与ble_bt_connect交叉使用)
|
||
*/
|
||
void ble_ancs_start(void);
|
||
|
||
/**
|
||
* @brief 断开ancs连接(不可与ble_bt_connect交叉使用)
|
||
*/
|
||
void ble_ancs_stop(void);
|
||
|
||
/**
|
||
* @brief ANCS Pefrom Notifction Action
|
||
* 控制手机端的操作，比如来电可以控制是否接听，拒接等
|
||
* uid: 通信连接ID，可以通过ANCS回调获取，用于保证是在同一个事件上
|
||
* opcode: 0 确认(接听) 1否定(拒接)
|
||
*/
|
||
void ble_ancs_remote_action(uint32_t uid, bool opcode);
|
||
|
||
// HFP相关接口
|
||
bool hfp_hf_is_company_apple(void); //判断当前连接设备是否为Apple
|
||
|
||
/*****************************************************************************
|
||
* BLE无连接广播相关（通道0，与BLE连接相互独立）
|
||
*****************************************************************************/
|
||
#define BLE_ADV0_EN_BIT 0x01
|
||
#define BLE_ADV0_MS_VAR_BIT 0x02
|
||
#define BLE_ADV0_ADDR_PUBIC_BIT 0x04
|
||
|
||
uint8_t ble_adv0_get_adv_en(void);
|
||
void ble_adv0_set_ctrl(uint opcode); //0=关闭广播, 1=打开广播, 2=更新广播数据（打开时直接广播，关闭时仅更新buffer）
|
||
|
||
|
||
#endif
|